Importance of Post-Harvest Urea Spray in Apple Orchards

Introduction:

Application of urea spray in apple has become a common practice throughout Kashmir valley among apple growers. Since apple isn’t only a livelihood source for growers, it also offers a decent and competitive living even with land holding as small as one acre of orchard, provided growers are able to produce quality apples. There are various misunderstandings regarding purpose, dosage and timing of post-harvest urea application in apple. In past, various articles have been published in local newspapers, however, the language used in the articles was too much technical to be comprehensible for any reader among growers community. In this write up, I will try to clear the misunderstandings in the easiest way, so that growers can understand the actual purpose, dosage and timing so as to achieve the desired benefits out of the sprayings.

Check out article on Apple Russeting: Important Causes and Management

Background of urea spray:

Management of diseases, especially scab and Alternaria leaf blotch (ALB) is the most difficult job for any commercial grower & it requires huge investments to produce disease free apples anywhere in world, especially under the climatic conditions with frequent rainfall combined with relatively cooler temperatures (around 20°C). Due to heavy pesticide use in apple, J&K tops the of states/UTs in per hectare consumption of pesticides. There is more than Rs.450 crore pesticide business in Kashmir valley and almost all of these pesticides are used to manage apple diseases and pests.

In countries with frequents rains during apple season like in Europe, growers are required to spray more than 20 fungicides to keep diseases especially scab away from the orchards. Even this year in 2021, many of our growers sprayed around 12 fungicides as there were more rain events in spring and summer months. It is hard reality that without fungicides, we can’t produce disease free apples, even in organic apple production system some fungicides like copper, sulphur, lime sulphur, bicarbonate salts etc., have been permitted to manage diseases like scab and ALB. However, growers can’t rely only on fungicides to manage disease problems, rather some practices like orchard sanitation, canopy & soil fertility management have a vital role to decrease disease (inoculum) availability and disfavour disease development.
During winters, disease like scab caused by a fungus (Venturia inaequalis) doesn’t only survive on fallen leaves, rather it also undergoes through sexual reproduction so as to ultimately produce ascospores exactly around green tip stage of apple for causing the first infection (Primary infection) during Mid-March.

Purpose of urea spray:

As we know, apple diseases especially scab and ALB (Alternaria may possibly survive on trees also) overwinters on fallen leaves, so removing leaves from orchards is extremely important to reduce disease prospects during next year. Now the question is whether it is possible for every grower to remove the leaves manually (we don’t have tractor drawn mower/shredder available in valley and in most of the case at this time we may be unable to use such machines in traditional orchard system) and the answer is NO, as due to various reasons every grower is not able to remove the leaves from his orchard.  So do we have any other option left behind to destroy the diseases (inoculum) that survives in fallen leaves?
Of course, we do have at least two options in traditional orchard system and one option in High Density planting system. Spraying urea on trees just before leaf fall or on leaf litter present on orchard floor in November or March, is a practice recommended all over the world for management of apple diseases. Urea; a good source of nitrogen (46%) is not preferred just because it is cheap, but also because it is readily absorbed by leaves of almost all plants at any time.
As we know nitrogen is a macronutrient, required by plants in higher quantities for their growth and development. But we need to understand that here in this fall application we don’t actually use urea as a nutrient supplement for growth, rather the purpose is to decrease C: N ratio in fallen leaves, which means in comparison to Carbon there should be more nitrogen in leaves, which makes it easy for microorganisms to rapidly decompose the leaves during winter months. So early decomposition of leaf litter means destruction of scab (inoculum).
In high quality research studies, it has been reported that Urea applied to trees in autumn before leaf fall or to the leaf litter in autumn or spring before bud break reduced the scab (ascosporic inoculum) 50 to 96%.  Moreover, urea at 5% or little lesser has another advantage, that it turn toxic to the disease propagules like scab Venturia which overwinters in leaves. The other option, I was talking with traditional system is to go for sheep grazing. Sheep may not only eat leaves carrying diseases, they will add lot of organic manure required by trees for producing high quality apples and will also disturb the movement of rodents, probably may force them to go out of the grazing orchard lands.

Secondary Benefits of urea spraying:

We must understand that postharvest application of urea is basically aimed to manage apple diseases, so the dose and time of application is very important. There are certainly some secondary benefits out of urea spraying directly on tree foliage & the benefits are clearly visible to the growers. When trees are deficient in nitrogen, urea application enriches them with nitrogen which helps in many ways especially in next year’s fruit set and quality. Moreover, the superficial fungal moulds growing on stems and branches are cleared with the spray & trees turn very clean good looking to the growers.

Dosage of Urea Spray:

There is a lot of confusion in dosage of urea spray among our growers.  In most of the countries farmers spray a definite quantity of both agrochemicals and spraying solution (water) in their orchards, however, there is no such practice in valley. For example, some farm universities in USA recommends urea spray on trees before leaf fall or on leaf litter on orchard floor at the rate of 40 pounds / 100 Gallons of water in (18.14 kg / 378 litres of water) in one acre (8 kanals) of orchard land, which is around 5% concentration. Due to lack of both advanced spraying technology as well as the proper layout of most of our traditional orchards unfit for using spraying machinery, huge amount of agrochemicals is wasted while spraying.
Our apple trees receive ten times more agrochemicals (although most part is washed away) than trees in other countries. It is the reason we have to be careful with the dosage of agro-chemicals. To leaf litter on orchard floor, urea can be sprayed at very higher concentrations, although 5% (5 kg / 100 litre of water) is recommended as it is economical and effective. However, we have regularly observed at various places in South Kashmir that 5% turned toxic to buds and next year’s crop in affected grower’s orchards was lost due to bud damage. At AARC Shopian (SKUAST-K) we used 5% urea spray in four varieties but there we didn’t report any bud damage.
Actually, effectiveness or Phytotoxicity due to foliar urea applications in fall depends on the nitrogen status of the plants. More nitrogen levels in plants means more chances of damage due to 5% urea application. It is because of these phytotoxic (bud damage) reports that last year, our university (SKUAST-K Shalimar) recommended urea application at 3-4% for Kashmir apple growers. I would add if there is more vegetative growth in orchard (which indicates higher nitrogen levels in plants), growers can prefer 3% otherwise there is no issue with 4%. It is not possible for every grower to go for leaf testing, otherwise that would have been the basis to decide the dosage of fall application of urea. We also need to remember that lower concentration can’t be as effective as higher concentrations (up to 5% of urea).

Is Nitrogen a defoliant?

Although, urea is basically being recommended to reduce disease inoculum and save few fungicidal application during next season, however, many people in valley believe that urea application is there to shed  leaves early, so they try to apply urea just after harvesting of apples in October, as they fare damages due to early snowfall . There are very few studies wherein urea in some crops at lower doses in combination with some defoliants like chelated copper (CuEDTA) or Zinc Sulphate has been reported to promote defoliation. However, individual application never promotes any defoliation in apple, rather it may further prolong the growth period if sprayed early in October.

Timing of urea spray:

There is lot confusion among the growers about the timing of urea application. Since many growers believe urea at higher concentration defoliates leaves, so they start spraying urea just after fruit harvesting. We have often observed that urea application in early or mid-October promotes further growth and also delays hardening in plants. The best time to spray urea is just before natural leaf fall in early November. Growers must remember that there is huge amount of nutrients in leaves and these nutrients are naturally translocated to trees before leaf fall. Urea can be applied on leaf litter present on orchard floor in spring also with better results, however, that will not give the secondary benefits of urea application.

Support us on Youtube

Conclusion:

• Removal of fallen leaves or grazing sheep in traditional orchards or urea application helps to reduce diseases incidence during next year.
• Urea @ 3 to 4% (3 – 4 kg /100 litre water) should be applied just before natural leaf fall starts in apple.
• Urea can be also sprayed @5% (5 kg / 100 litre water) on leaf litter on orchard floor during Autumn in November or before bud break in March with good results
• Early spraying of urea can prolong growth period and may delay hardening in trees.

Author: Dr. Tariq Rasool Rather, Plant Pathologist, FOA, Wadura, SKUAST-K